Getting started with your esieabot

This page is a quick guide to the steps you should follow, from acquiring your esieabot to programming it.

1. Get an esieabot kit

   1. If you are an ESIEA student, you will receive your esieabot a few weeks after your arrival.

   2. If you are a teacher or a staff member of ESIEA, you can send us an email at sav-esieabot@esiea.fr.

   3. If you wish to purchase an esieabot kit, you can send us an email at esieabot@esiea.fr.

   4. If you wish to build your own esieabot from scratch, you can refer to our documentation on manufacturing the esieabot.

2. Assemble your esieabot

   To do this, refer to the assembly manual corresponding to your version of the esieabot.

3. Install your esieabot

   To install your esieabot, get your micro SD card and go to the installation page.

4. Connect your esieabot to the network

   To connect your esieabot to the network, refer to the network connection page.

5. Open a terminal on your esieabot

   To open a terminal on your esieabot, refer to the terminal access page.

6. Program your esieabot

   To program your esieabot, refer to the programming page.

7. Improve your esieabot

   To improve your esieabot, refer to the improvements section.

8. Repair your esieabot

   To repair your esieabot, refer to the repair page.